Information und configuration hints for SIP provider ecotel, sipTrunk 2.0 (Germany).
The information published here applies exclusively to ecotel sipTrunk2.0, but not to sipAccount2.0.
The ecotel sipTrunk 2.0 is a SIP trunk with user authentication. You will receive information to register the SIP trunk.
During creation of the SIP trunkgroup, profile 'ecotel sipTrunk 2.0 (DE)' has to be selected.
IMPORTANT: After creation of the SIP trunkgroup, underneath the properties of the trunkgroup, in the field 'Realm' of the 'SIP' tab, the customer individual value has to entered. This value is named 'SIP Registrar/Domain/Realm' in the documents from ecotel, i.e. '12345678.sip-ecotel.de'. Until SwyxWare 11.10.1 including, it is necessary to change the entries underneath the properties of the trunkgroup for the fields 'Registrar' and 'Proxy' from "trunk.sip-ecotel.de" to "trunk3.sip-ecotel.de" .
During the following creation of the actual SIP trunk, when providing the registration information, in the fields 'User ID' and 'Username' the 'Benutzername' from the ecotel documents have to be entered.
After specifying the number range, it is necessary to configure a SIP URI for the trunk. The assigned number block and the numberformat must be considered.
Numberblock: +49 231 9988776600 ... +49 231 9988776699
In this case, the SIP URI must be entered in the format 004923199887766*@*.
- Incoming/outgoing national calls
- Incoming/outgoing international calls
- Correct Calling Line Identification (CLI) on national and international calls
- CLIP No Screening
- Holding and retrieving calls
- Toggeling between two calls
- Call transfer
- Mutually supported codecs:
- Incoming/outgoing DTMF signaling in accordance with via RFC2833
- Fax transmission via G.711
FAX transmission via T.38 is not supported
03/01/2018 with SwyxWare 11.10.1