Release SwyxPhone Firmware V1 R0.8.2.0 for L6x - Desk Phones

The information in this article applies to the following products:

• SwyxPhone L62
• SwyxPhone L64
• SwyxPhone L66
• Swyx 13.10 and higher, 14

Summary

Enreach releases firmware V1 R8.2.0 for the SwyxPhone L6x series. This firmware is released for use with Swyx versions higher than 13.10 and Swyx 14.

If you are using an older Swyx version, we recommend that you update the entire system beforehand.

Information

This version is a maintenance version from the OEM manufacturer.
In addition to several minor security and stability improvements, this version solves some specific errors that have been observed in the context of using the devices on a Swyx platform:

• If a call notification occurs parallel to an incoming call, the display remains blank until the call notification times out (SwyxPhone L64/L66)
• A call notification is overwritten by (unexpected and at this point meaningless) time information (SwyxPhone L62)

Note on SwyxPhone Firmware Update

To update the firmware at your Swyx platform you have to perform the following steps related to the installed Swyx version:

Open the Server Settings within the Swyx Administration and select the tab "SwyxPhone Firmware Update". Within this configuration select the option "Get". Hereby the SwyxServer will contact the Swyx FTP server (ftp.swyx.com) which is configured by default and query the latest firmware version. 

After this you could validate, that the new firmware version was updated by checking the firmware version information.

Manual Download of SwyxPhone Firmware

In the context of a standard Swyx installation is no need for a manual download and update of the SwyxPhone firmware. Nevertheless there are some use cases where the manual update or the usage of a local FTP server make sense or is mandatory.

For that purpose you can find the download links here:

• SwyxPhone L62 - FW version V1 R8.2.0: Download firmware now
• SwyxPhone L64/L66 - FW version V1 R8.2.0: Download firmware now