The SIP Trunk from echtschnell was first tested and released with SwyxWare 126.96.36.199. It is a SIP trunk which is compatible to the SIPConnect1.1 and BITKOM recommendations about SIP trunking.
The SIP Trunk from echtschnell is a SIP Trunk with user authentication, i.e. you receive information on user ID, user name and password. The names may differ, or you may only receive a name or ID with password. In this case the user ID is identical to the user name when configuring the SIP trunk in SwyxWare.
The SIP Trunk from echtschnell can be used from SwyxWare 188.8.131.52 on. When using an earlier version of SwyxWare, incompatibilities cannot be excluded and use is at your own risk.
The SIP Trunk from echtschnell is suitable for central connection in the data center.
When creating the SIP trunk group, select the profile 'echtschnell (DE)'. If the profile is not included in the corresponding list, you can download the required CustomProviderProfiles.config for SwyxWare at the end of this article. For more information about using this file, see Configuration and Adaptation of SIP Providers via Provider Profiles.
In the properties of the SIP Trunk, tab 'Number Signalling', for the feature CLIP No Screening, the option "Always use originators number" has to be selected.
- Incoming/outgoing national calls
- Correct Calling Line Identification (CLI) on national and calls
- Holding and retrieving calls
- Toggeling between two calls
- Call transfer
- Call forwarding
- Mutually supported codecs: G.722/ G.711a/ G.711u/ G.729
- Incoming/outgoing DTMF signaling in accordance with via RFC2833
- FAX transmission via T.38
09/01/2019 with SwyxWare 184.108.40.206
The third-party contact information included in this article is provided to help you find the technical support you need. This contact information is subject to change without notice. Swyx in no way guarantees the accuracy of this third-party contact information nor is responsible for it's content.