Enreach DECT 600 Firmware Pack v.7.60.B0201 (v1) Released

The information in this article applies to the following products:

• Enreach DECT BS 600 L
• Enreach DECT BS 600 S
• Enreach DECT BS 600 Outdoor
• Enreach DECT R 600 Repeater
• Enreach DECT HS 630
• Enreach DECT HS 650
• Enreach DECT HS 670
• SwyxPhone D510
• SwyxPhone D565

SUMMARY

Enreach has released a new firmware package for its DECT 600 Multi- and Microcell systems. The package contains current firmware versions for all Enreach DECT 600 components and for the SwyxPhone D510/D565 released for operation on Enreach DECT 600 systems.

This firmware pack supports the new "Swyx DECT Integration for Enreach DECT 600" with Swyx 14.20, as well as the standard installation (without Swyx DECT Integration) with Swyx 14.20 and older.

Firmware version 7.60.B0201 (v1) will be available for download from Enreach PartnerNet from 25.2.2025, see Enreach DECT 600 Firmware Download or will be offered in the Swyx Control Center of Swyx 14.20 if Swyx DECT Integration is already activated.

INFORMATION

Enreach has released a new firmware pack for its Enreach DECT 600 systems.

The package contains the latest firmware versions for all Enreach DECT 600 - and all SwyxDECT 500 - components which are approved for operation on Enreach DECT 600.

The prerequisite for the function package “Swyx DECT Integration for Enreach DECT 600” is the firmware pack v.7.60.B0201 (v1) together with Swyx 14.20. The following functions are supported:

• Zero Touch Provisioning via Multicast (SwyxFlex) or Swyx Redirection Services with mTLS authentication (SwyxON)
• Provisioning of base stations and handsets with Swyx user accounts in the Swyx Control Center (SCC)
• Dynamic assignment of handsets in CTI+ mode to the appropriate base station
• Provisioning of the Swyx global directory
• Firmware management (updates and deployment) via SCC

Restriction: Repeaters must still be set up and updated in the Admin Web-UI of the Enreach DECT 600 S/L.

For the initial set-up of the Swyx DECT Integration for Enreach DECT 600 or the migration of an existing standard installation, please read the documentation carefully (Swyx Online Manual). Please note that all base stations must be updated to 7.60.B0201 before you start the integration. Following you can update the handsets via the SCC.

In addition to these new integration functions, various fixes, improvements and maintenance, this firmware package primarily addresses the following problems that have been observed in connection with the use of Swyx:

• Fixed: Under certain situation a call gets terminated after hold retrieve on handset (DECT 600L)
• Fixed: Wrong German wording on HS 630
• Fixed: Base station reboots several times with the same issue VLAN_CHANGED
• Fixed: Calling party name is truncated to 12 characters
• Fixed: Wrong URL for Swyx Redirection Services (mandatory for SwyxON)
• Fixed: Web Administration main.html does not work properly after update to latest Chrome/Edge version

Known issue:

• Standard (non integrated) installation: Orange blinking LED at the base station even when the system is set-up correctly and is working properly. This blinking LED is an artefact of the Swyx DECT Integration feature. Workaround: Open the Enreach DECT 600 Web Administration and click in the left menue on “Management”. Go to the paragraph “Configuration” and enable the parameter “Configuration Server Address Lock". Following the LED should be switch to steady green.

For more information about the functionality of the firmware Pack v.7.60.B0201 (v1) please refer to the attached release notes. Please note especially the downgrade instructions if you intend to downgrade a DECT BS 600 L to an older firmware version, e.g. to add it to an existing SwyxDECT 500 system.

If you only want to update/downgrade individual units, this can be done during operation. However, if you want to update the entire system to v.7.60.B0201 (v1), please note the information on using a maintenance window in the release notes.

The following article (Important Notes on the Firmware Update) gives you additional information for installing this firmware.