The information in this article applies to the following products:
- SwyxDECT 500
- SwyxPhone D510
- SwyxPhone D565
- Enreach DECT 600 L
- Enreach DECT HS 6x0
- Enreach DECT R 600 Repeater
For the operation of DECT 600 components on a SwyxDECT 500 multicell system a suitable firmware has to be installed on these components.
With the Firmware Compatibility Pack based on the already released firmware v5.30.B02 Enreach provides a firmware for all DECT 600 components supported in the context of SwyxDECT 500.
The Firmware Compatibility Pack can be found in our Partnernet: SwyxDECT 500 Firmware Download and will be available within the next day.
Attention: If you update from version v3.x it is absolutly mandatory to make a intermediate step via a version v4.x. Please read the attached release notes carefully.
With the release of the new Enreach DECT 600 Multicell system the update for the proven SwyxDECT 500 is available. More information about the product update can be found here.
Existing SwyxDECT 500 installations can be upgraded or replaced with DECT 600 components - this ensures the supply of spare parts for the future. More information about the downward compatibility of DECT 600 components can be found here.
For the operation of DECT 600 components on a SwyxDECT 500 system a firmware downgrade of the components has to be done. With the Firmware Compatibility Pack based on the already released firmware v5.30.B02 DECT 600 components can now easily be connected to a SwyxDECT 500 system.
Note: In the interest of better differentiation, the paths in the Firmware Compatibility Pack archive file have been changed. Copy the decompressed firmware package including the stored paths to your update server and then enter the path in the DECT 500 administration accordingly. Alternatively, you can also copy the individual firmware folders for the respective components into your existing folder structure.
For more information about the functionality of the firmware v5.30.B02, please refer to the corresponding release article.
If you only want to update/downgrade individual units, this can be done during operation. However, if you want to update the entire system to v5.30.B02, please note the information on using a maintenance window in the release notes.
The following article (Important Notes on the Firmware Update) gives you additional information for installing this firmware.